TBD Black Magic ATEM Raspberry Pi Tally

Third Party Software designed for Black Magic Atems
Punkley
Site Admin
Posts: 55
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Wed May 20, 2020 9:27 pm

I havent tried on a 4b as I don't have one, It might require a system update.

one thing to try, would be to get an older pi, eg a 3 then doing a system upgrade on it.

I can't really afford to get a new Pi4 atm (due to some virus going on), so development might be a bit slow, unless one gets donated.

Punkley
Site Admin
Posts: 55
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Fri May 22, 2020 10:51 am

This is mostly untested, however I built the tally on the latest rasbian, see if it works on a 4b, if it does I will release it

https://www.tbdproductions.com.au/files ... v07.img.gz

Nobodykmd
Posts: 1
Joined: Sun May 24, 2020 8:12 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Nobodykmd » Sun May 24, 2020 8:15 pm

Hi, is there a way to use that new image with an Raspberry Pi 1B?

Punkley
Site Admin
Posts: 55
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Sun May 24, 2020 10:24 pm

It should work with all models.

me1483
Posts: 5
Joined: Wed May 06, 2020 9:25 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by me1483 » Sun May 31, 2020 11:38 pm

Sorry for the delay replying. I was unable to get v7 to boot on my Pi 4b - no output on the micro HDMI, no response to ping.

Punkley
Site Admin
Posts: 55
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Mon Jun 01, 2020 12:00 am

hmm ok, it might have to wait till i get some more gigs and can get a 4b.

Kingsley

me1483
Posts: 5
Joined: Wed May 06, 2020 9:25 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by me1483 » Mon Jun 01, 2020 12:14 am

I did get a current Raspian Lite image set up like your image using root's .bash_history file as a template, running the ATEM script. If it would be helpful I could figure out how to take an image of mine and send to you.

Punkley
Site Admin
Posts: 55
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Mon Jun 01, 2020 12:16 am

just copy the python from mine, and use it on yours :)

me1483
Posts: 5
Joined: Wed May 06, 2020 9:25 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by me1483 » Mon Jun 01, 2020 12:46 am

Done, and working. :) I figured I'm not the only one who'll want it on a 4b, though.

I've wondered why you chose to release it as an image with the Python running in Screen rather than as a .deb package running the Python as a daemon.

Punkley
Site Admin
Posts: 55
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Mon Jun 01, 2020 1:14 am

easy I wrote it for myself :), released it for others. I liked being able to see what was going on (before systemd).

I should change it....but I havent :)

I've also added the stuff to make it easier for non linux techs to change IP addresses etc, using the tally-config user.

I will make it work on the 4b, but you know corona virus, and no income atm :) I've forgotten what a gig is :)

Post Reply