TBD Black Magic ATEM Raspberry Pi Tally

Third Party Software designed for Black Magic Atems
Punkley
Site Admin
Posts: 57
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Fri Aug 09, 2019 10:53 pm

I would suggest not using it over wifi, its all udp packets and there is a risk of dropping them

if you do want too, then just set it up as you would rasbian, log in as root/root, then type
mount -o remount,rw /
before you make changes

Kingsley

samraby
Posts: 1
Joined: Thu Oct 10, 2019 1:59 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by samraby » Thu Oct 10, 2019 2:03 pm

epicallyadams wrote:
Wed Feb 27, 2019 9:14 am
I don't believe you can do that in Tally Config, how would i go about altering the code, a file on the SD card if i view on a windows computer?

Sorry, not done much Pi coding but familiar with actionscript and python so if i can find the file i'm sure i can work it out!

Cheers
I've just set this up on my original Pi model B.

Im waiting to borrow a friends ATEM, I assume that if it cant establish a connection to the atem then it just sets all GPIO's on ?

It would be usefull to know how to change which channel mapps to which GPIO , i use the atem mobile and its not always configured the same

other than that this is great ! really easy to use. :D

jmvb
Posts: 10
Joined: Wed Aug 15, 2018 4:53 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by jmvb » Sat Jan 11, 2020 3:35 pm

I would love manage a Xbee integration for wireless transmission...

Anyone knows how?

Punkley
Site Admin
Posts: 57
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Sun Jan 12, 2020 9:46 pm

Well it looks like you can get a sheild for it so you should be able to do it.

I dont know much about the protocal.

irosha nuwan
Posts: 2
Joined: Sun Mar 22, 2020 3:12 am

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by irosha nuwan » Sun Mar 22, 2020 3:30 am

Hi everyone I want to make a blackmagic wireless tally system. If you have a diagram or a link on how to create it, give it. Although it is possible to find chords that are used for this purpose, no complete method has been found. Thank you very much

Punkley
Site Admin
Posts: 57
Joined: Tue May 29, 2018 2:22 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Punkley » Sun Mar 22, 2020 4:09 am

I've been looking at how to do this, I got one working with somel effectiveness (it worked 80% of the time),

I ran out of time developing it. I also ran out of funds to do it (gigs are a little dry atm). I planed to make it work with the Tally I have already had using wifi.

I need to afford a few of these to test/develop it
https://store.arduino.cc/usa/mkr-wifi-1010

savasv6
Posts: 2
Joined: Sat Apr 18, 2020 10:30 am

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by savasv6 » Sat Apr 18, 2020 10:40 am

Hello!

This is a great system, but i'm having trouble setting it up. I have tried:

-Plugging both the ATEM an the Pi into a router, and given them ips (192.168.1.240 for ATEM and 192.168.1.241 for Pi)
-Plugging the ATEM directly into the Pi (Tried both with the ip above and the standard ip(172.30.0.1 for Pi and 172.30.0.240 for ATEM, in this scenario we gave gateway 172.30.0.0 to ATEM))

I have not managed to get any signal on any GPIO pins that are designated for program output. In all cases above we have used a standard netmask (255.255.255.0) and tried restarting everything multiple times. I also confirmed the LEDs were working correctly by using one of the 3.3v outputs.

I hope you are able to help me!

Nelson
Posts: 1
Joined: Wed Apr 22, 2020 8:37 am

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by Nelson » Wed Apr 22, 2020 8:41 am

I’m struggling with the same as savasv6. I do get an error my re-save during boot, don’t know if that relates to why it doesn’t work?

Error message
Failed to start Create volatile files and directories

savasv6
Posts: 2
Joined: Sat Apr 18, 2020 10:30 am

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by savasv6 » Mon Apr 27, 2020 1:07 pm

Hey again! I got it to work after a wiping the SD card some times and understanding i had to use some other pins. :)

me1483
Posts: 6
Joined: Wed May 06, 2020 9:25 pm

Re: TBD Black Magic ATEM Raspberry Pi Tally

Post by me1483 » Wed May 06, 2020 9:27 pm

Any chance this could be updated to work on a Pi 4B? Or am I doing something wrong? It won't boot, I just get a blank screen on both mini HDMI ports.

Post Reply